Availability: | |
---|---|
Quantity: | |
LD-GS46100 (PFC)
Wisdom
Product Information
This 100A/46V semiconductor power supply is a constant current pulse output power supply. The output voltage is adaptively matched with the laser load (diode characteristics). The semiconductor laser system is composed of a semiconductor laser handle, which can achieve painless and permanent hair removal.
0 Power failure rate 14~24Bars load adaptation 40% Customer customization
Product Features
1. High or low level control signal light output can be customized.
2. The input 5V analog control voltage corresponds to 100A current output.
3. Current control signal comes with 5V limit function.
4. Over current protection, over voltage protection, high temperature protection.
5. With power factor correction function.
The basic principle of semiconductor laser hair removal machine is mainly biological effect. When it chooses laser with wavelength of 808nm for irradiation, it not only has good absorption of hair follicle melanin but also has no effect on normal epidermis. The melanin in light energy is absorbed by hair stem and light energy changes into heat energy, raise the temperature of hair follicle thereby, the hair follicle structure will be destroyed, the hair follicle that already destroyed passes through natural physiology process hind is shed, achieve depilate purpose thereby.
Products Description
Product Name | 100A/46V Diode Laser Power Supply |
Model Number | LD-GS46100(PFC) |
Input voltage | 220VAC(+10%) |
Inter voltage frequency | 50Hz~60Hz |
Output voltage | 26~46VDC |
Output current | 5~100A |
Output power | Max.4600W |
Output frequency | 1~10Hz |
Output current duty cycle | Max.20% |
Cooling method | Air cooling |
Dimension(L*W*H) | 330mm x 206mm x 80mm |
Weight | 3.35kg |
Attention
- The wrong input voltage must be prevented during use. In particular, the 220V voltage cannot be connected to the nominal 110V power supply.
- It is required to use two high-voltage cables larger than 2.5 square meters to connect the power supply with the semiconductor laser.
- In the layout of the whole machine, strong electric wires should be separated from the weak signal lines to reduce interference.
- Please keep the environment dry and clean to avoid high voltage leakage.
- In the complete layout, the power must be placed in a well-ventilated location.
- Operating Humidity 20~90%RH,without dew.
- Storage Temperature, Humidity -40~+85°C, 10~95%RH.
Company Information
Wisdom(Guangzhou)Electronics Co., Ltd. was founded in 2006 and its birthplace is located in the beautiful Guangzhou, China.
Specializing in the research and development and production of beauty intelligent power supply automation. The companys products
mainly include IPL power supply, OPT power supply, laser power supply, RF power supply, 808 power supply, laser controller, IPL
controller, magneto-optical controller, 808 controller, RF controller and IPL handle, etc., which are mainly used in the beauty
industry Such as laser hair removal, skin regeneration, anti-aging, anti-pigmentation, weight loss and other beauty categories, it
is an innovative company integrating RD, production and sales....
Exhibition
Our Company's advantages
- The power failure rate is less than 1%
- Finished and semi-finished products are 100% inspected
- Custom samples only take 15 to 30 days
- Batch production takes only 20~30 days
- Seven experienced r&d engineers
- Seventeen years of industry experience
FAQ
1. Are you trading company or manufacturer ?
Answer: We are manufacturer.
- Thirteen years of experience in serving foreign customers
- More than 100 products to choose from
- One thousand three hundred square meters plant
- The monthly production capacity is over 3,000
- Supplied to 30 countries around the world
Product Information
This 100A/46V semiconductor power supply is a constant current pulse output power supply. The output voltage is adaptively matched with the laser load (diode characteristics). The semiconductor laser system is composed of a semiconductor laser handle, which can achieve painless and permanent hair removal.
0 Power failure rate 14~24Bars load adaptation 40% Customer customization
Product Features
1. High or low level control signal light output can be customized.
2. The input 5V analog control voltage corresponds to 100A current output.
3. Current control signal comes with 5V limit function.
4. Over current protection, over voltage protection, high temperature protection.
5. With power factor correction function.
The basic principle of semiconductor laser hair removal machine is mainly biological effect. When it chooses laser with wavelength of 808nm for irradiation, it not only has good absorption of hair follicle melanin but also has no effect on normal epidermis. The melanin in light energy is absorbed by hair stem and light energy changes into heat energy, raise the temperature of hair follicle thereby, the hair follicle structure will be destroyed, the hair follicle that already destroyed passes through natural physiology process hind is shed, achieve depilate purpose thereby.
Products Description
Product Name | 100A/46V Diode Laser Power Supply |
Model Number | LD-GS46100(PFC) |
Input voltage | 220VAC(+10%) |
Inter voltage frequency | 50Hz~60Hz |
Output voltage | 26~46VDC |
Output current | 5~100A |
Output power | Max.4600W |
Output frequency | 1~10Hz |
Output current duty cycle | Max.20% |
Cooling method | Air cooling |
Dimension(L*W*H) | 330mm x 206mm x 80mm |
Weight | 3.35kg |
Attention
- The wrong input voltage must be prevented during use. In particular, the 220V voltage cannot be connected to the nominal 110V power supply.
- It is required to use two high-voltage cables larger than 2.5 square meters to connect the power supply with the semiconductor laser.
- In the layout of the whole machine, strong electric wires should be separated from the weak signal lines to reduce interference.
- Please keep the environment dry and clean to avoid high voltage leakage.
- In the complete layout, the power must be placed in a well-ventilated location.
- Operating Humidity 20~90%RH,without dew.
- Storage Temperature, Humidity -40~+85°C, 10~95%RH.
Company Information
Wisdom(Guangzhou)Electronics Co., Ltd. was founded in 2006 and its birthplace is located in the beautiful Guangzhou, China.
Specializing in the research and development and production of beauty intelligent power supply automation. The companys products
mainly include IPL power supply, OPT power supply, laser power supply, RF power supply, 808 power supply, laser controller, IPL
controller, magneto-optical controller, 808 controller, RF controller and IPL handle, etc., which are mainly used in the beauty
industry Such as laser hair removal, skin regeneration, anti-aging, anti-pigmentation, weight loss and other beauty categories, it
is an innovative company integrating RD, production and sales....
Exhibition
Our Company's advantages
- The power failure rate is less than 1%
- Finished and semi-finished products are 100% inspected
- Custom samples only take 15 to 30 days
- Batch production takes only 20~30 days
- Seven experienced r&d engineers
- Seventeen years of industry experience
FAQ
1. Are you trading company or manufacturer ?
Answer: We are manufacturer.
- Thirteen years of experience in serving foreign customers
- More than 100 products to choose from
- One thousand three hundred square meters plant
- The monthly production capacity is over 3,000
- Supplied to 30 countries around the world